The Output For lshw For Dell Mini 10V

The Mini 10V is called Triton after the ancient God.  The Dell netbook uses an encrypted hard drive.  The boot is configured to display the text output instead of a pretty picture which should help with certain attacks.  The bios and hard drive are protected with two passwords.  All in all a fairly secure computer.  The encrypted partition is protected by a strong password and is unlikely to be brute force.  More likely would be a flaw in the crypt itself that would lead to a breach.

Triton

id:
triton
description: Portable Computer
product: Inspiron 1011 ()
vendor: Dell Inc.
version: A06
serial: 91CP2L1
width: 32 bits
capabilities: smbios-2.5 dmi-2.5 smp-1.4 smp
configuration:
boot = oem-specific
chassis = portable
cpus = 1
uuid = 44454C4C-3100-1043-8050-B9C04F324C31
id:
core
description: Motherboard
product: CN0Y53
vendor: Dell Inc.
physical id:
0
version: A06
serial: .91CP2L1.ppppppppppppppd
id:
firmware
description: BIOS
vendor: Dell Inc.
physical id:
1
version: A06
date: 07/29/2009
size: 102KiB
capacity: 1984KiB
capabilities: pci pnp apm upgrade shadowing escd cdboot bootselect acpi usb smartbattery biosbootspecification
id:
cpu
description: CPU
product: Intel(R) Atom(TM) CPU N270 @ 1.60GHz
vendor: Intel Corp.
physical id:
5
bus info:
cpu@0
version: 6.12.2
serial: 0001-06C2-0000-0000-0000-0000
slot: U1
size: 1067MHz
capacity: 2048MHz
width: 32 bits
clock: 533MHz
capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 xtpr pdcm movbe lahf_lm dtherm cpufreq
configuration:
cores = 1
enabledcores = 1
id = 1
threads = 2
id:
cache:0
description: L1 cache
physical id:
6
slot: L1 Cache
size: 32KiB
capacity: 32KiB
capabilities: asynchronous internal write-back
id:
cache:1
description: L2 cache
physical id:
7
slot: L2 Cache
size: 512KiB
capacity: 4MiB
capabilities: burst external write-back
id:
logicalcpu:0
description: Logical CPU
physical id:
1.1
width: 32 bits
capabilities: logical
id:
logicalcpu:1
description: Logical CPU
physical id:
1.2
width: 32 bits
capabilities: logical
id:
memory
description: System Memory
physical id:
f
slot: System board or motherboard
size: 1GiB
capacity: 2GiB
id:
bank
description: SODIMM DDR2 Synchronous 533 MHz (1.9 ns)
physical id:
0
slot: M1
size: 1GiB
width: 32 bits
clock: 533MHz (1.9ns)
id:
pci
description: Host bridge
product: Mobile 945GSE Express Memory Controller Hub
vendor: Intel Corporation
physical id:
100
bus info:
pci@0000:00:00.0
version: 03
width: 32 bits
clock: 33MHz
configuration:
driver = agpgart-intel
resources:
irq : 0
id:
display:0
description: VGA compatible controller
product: Mobile 945GSE Express Integrated Graphics Controller
vendor: Intel Corporation
physical id:
2
bus info:
pci@0000:00:02.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration:
driver = i915
latency = 0
resources:
irq : 16
memory : f0000000-f007ffff
ioport : 1800(size=8)
memory : d0000000-dfffffff
memory : f0200000-f023ffff
id:
display:1
description: Display controller
product: Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller
vendor: Intel Corporation
physical id:
2.1
bus info:
pci@0000:00:02.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration:
latency = 0
resources:
memory : f0080000-f00fffff
id:
multimedia
description: Audio device
product: NM10/ICH7 Family High Definition Audio Controller
vendor: Intel Corporation
physical id:
1b
bus info:
pci@0000:00:1b.0
version: 02
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration:
driver = snd_hda_intel
latency = 0
resources:
irq : 44
memory : f0440000-f0443fff
id:
pci:0
description: PCI bridge
product: NM10/ICH7 Family PCI Express Port 1
vendor: Intel Corporation
physical id:
1c
bus info:
pci@0000:00:1c.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration:
driver = pcieport
resources:
irq : 40
ioport : 3000(size=4096)
memory : 40000000-401fffff
ioport : 40200000(size=2097152)
id:
pci:1
description: PCI bridge
product: NM10/ICH7 Family PCI Express Port 2
vendor: Intel Corporation
physical id:
1c.1
bus info:
pci@0000:00:1c.1
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration:
driver = pcieport
resources:
irq : 41
ioport : 4000(size=4096)
memory : f0100000-f01fffff
ioport : 40400000(size=2097152)
id:
network
description: Wireless interface
product: BCM4312 802.11b/g LP-PHY
vendor: Broadcom Corporation
physical id:
0
bus info:
pci@0000:03:00.0
logical name:
wlan0
version: 01
serial: c4:17:fe:12:2e:e8
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration:
broadcast = yes
driver = wl0
driverversion = 6.30.223.248 (r487574)
ip = 192.168.43.62
latency = 0
multicast = yes
wireless = IEEE 802.11abg
resources:
irq : 17
memory : f0100000-f0103fff
id:
pci:2
description: PCI bridge
product: NM10/ICH7 Family PCI Express Port 3
vendor: Intel Corporation
physical id:
1c.2
bus info:
pci@0000:00:1c.2
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration:
driver = pcieport
resources:
irq : 42
ioport : 2000(size=4096)
memory : 40600000-40afffff
ioport : f0500000(size=1048576)
id:
network
description: Ethernet interface
product: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id:
0
bus info:
pci@0000:04:00.0
logical name:
eth0
version: 02
serial: 00:26:b9:a0:83:1b
size: 10Mbit/s
capacity: 100Mbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration:
autonegotiation = on
broadcast = yes
driver = r8169
driverversion = 2.3LK-NAPI
duplex = half
latency = 0
link = no
multicast = yes
port = MII
speed = 10Mbit/s
resources:
irq : 43
ioport : 2000(size=256)
memory : f0510000-f0510fff
memory : f0500000-f050ffff
memory : f0520000-f053ffff
id:
usb:0
description: USB controller
product: NM10/ICH7 Family USB UHCI Controller #1
vendor: Intel Corporation
physical id:
1d
bus info:
pci@0000:00:1d.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration:
driver = uhci_hcd
latency = 0
resources:
irq : 23
ioport : 1820(size=32)
id:
usb:1
description: USB controller
product: NM10/ICH7 Family USB UHCI Controller #2
vendor: Intel Corporation
physical id:
1d.1
bus info:
pci@0000:00:1d.1
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration:
driver = uhci_hcd
latency = 0
resources:
irq : 19
ioport : 1840(size=32)
id:
usb:2
description: USB controller
product: NM10/ICH7 Family USB UHCI Controller #3
vendor: Intel Corporation
physical id:
1d.2
bus info:
pci@0000:00:1d.2
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration:
driver = uhci_hcd
latency = 0
resources:
irq : 18
ioport : 1860(size=32)
id:
usb:3
description: USB controller
product: NM10/ICH7 Family USB UHCI Controller #4
vendor: Intel Corporation
physical id:
1d.3
bus info:
pci@0000:00:1d.3
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration:
driver = uhci_hcd
latency = 0
resources:
irq : 16
ioport : 1880(size=32)
id:
usb:4
description: USB controller
product: NM10/ICH7 Family USB2 EHCI Controller
vendor: Intel Corporation
physical id:
1d.7
bus info:
pci@0000:00:1d.7
version: 02
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration:
driver = ehci-pci
latency = 0
resources:
irq : 23
memory : f0444000-f04443ff
id:
pci:3
description: PCI bridge
product: 82801 Mobile PCI Bridge
vendor: Intel Corporation
physical id:
1e
bus info:
pci@0000:00:1e.0
version: e2
width: 32 bits
clock: 33MHz
capabilities: pci subtractive_decode bus_master cap_list
id:
isa
description: ISA bridge
product: 82801GBM (ICH7-M) LPC Interface Bridge
vendor: Intel Corporation
physical id:
1f
bus info:
pci@0000:00:1f.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration:
driver = lpc_ich
latency = 0
resources:
irq : 0
id:
ide
description: IDE interface
product: 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode]
vendor: Intel Corporation
physical id:
1f.2
bus info:
pci@0000:00:1f.2
version: 02
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list
configuration:
driver = ata_piix
latency = 0
resources:
irq : 19
ioport : 1f0(size=8)
ioport : 3f6
ioport : 170(size=8)
ioport : 376
ioport : 1810(size=16)
memory : 40b00000-40b003ff
id:
serial
description: SMBus
product: NM10/ICH7 Family SMBus Controller
vendor: Intel Corporation
physical id:
1f.3
bus info:
pci@0000:00:1f.3
version: 02
width: 32 bits
clock: 33MHz
configuration:
latency = 0
resources:
ioport : 18c0(size=32)
id:
scsi
physical id:
0
logical name:
scsi0
capabilities: emulated
id:
disk
description: ATA Disk
product: SAMSUNG SSD UM41
physical id:
0.0.0
bus info:
scsi@0:0.0.0
logical name:
/dev/sda
version: VAM1
serial: DCF410S936SE936B8675
size: 14GiB (16GB)
capabilities: partitioned partitioned:dos
configuration:
ansiversion = 5
sectorsize = 512
signature = 0006c99e
id:
volume:0
description: Linux filesystem partition
vendor: Linux
physical id:
1
bus info:
scsi@0:0.0.0,1
logical name:
/dev/sda1
logical name:
/boot
version: 1.0
serial: 4d73753f-b696-4feb-a14e-efecdff37099
size: 243MiB
capacity: 243MiB
capabilities: primary bootable extended_attributes ext2 initialized
configuration:
filesystem = ext2
lastmountpoint = /boot
modified = 2017-04-07 18:39:50
mount.fstype = ext2
mount.options = rw,relatime
mounted = 2017-04-07 18:39:50
state = mounted
id:
volume:1
description: Extended partition
physical id:
2
bus info:
scsi@0:0.0.0,2
logical name:
/dev/sda2
size: 14GiB
capacity: 14GiB
capabilities: primary extended partitioned partitioned:extended
id:
logicalvolume
description: Linux filesystem partition
physical id:
5
logical name:
/dev/sda5
capacity: 14GiB
id:
battery
product: Unknow!
vendor: Unknow!
physical id:
1
slot: Rear
capacity: 57720mWh
configuration:
voltage = 11.1V

Continue reading

Install and Setup Logwatch on Ubuntu

I installed the program logwatch. A little confusing at first. This is mostly so I don’t forget. I thought it could help others.  An excellent tool for auditing an Ubuntu system.

sudo apt-get install exim4

I prefer EXIM4, however some people like Postfix. Setting up EXIM4 and Postfix is beyond the scope of this logwatch thread.

dpkg-reconfigure exim4-config
sudo apt-get install logwatch
sudo nano -w -W /usr/share/logwatch/default.conf/logwatch.conf

Use nano to change the following settings.

#To make Html the default formatting Format = html
Format = html
# Default person to mail reports to.  Can be a local account or a
# complete email address.  Variable Output should be set to mail, or
# --output mail should be passed on command line to enable mail feature.
MailTo = user@example.org
# Default person to mail reports from.  Can be a local account or a
# complete email address.
MailFrom = user@ubuntu.org
sudo logwatch --html_wrap 80 > logwatch.html

When done, open logwatch.html in your home dir. Example /home/nate/logwatch.html, should open in your web browser. Everything should work. Now you will need to wait 12 to 24 hours for an email from logwatch. Check your spam box too if you missed it. Be sure to add logwatch to your email address contact list.

Get an Email Every time Sudo is Used

Every time I use sudo on the command line I get an email.  This way I can always know if someone has attempted to run sudo on my computer.  Plus; combined with Gmail, it makes for an excellent audit trail.

I set it up following the guide here; Sudo email setup, original post

Or you can do the below.

I wanted to get an email from the computer every time sudo was used successfully or not. You need an MTA or mail transport agent. I have Postfix on my computer. There may be other ways to send an email; but that is beyond the scope of this post. I will show you what I did and I will assume you have an MTA already setup.

The first command tells visudo where to create the file. All edits should go to /etc/sudoers.d because this will make software updates more sane.

sudo visudo -f /etc/sudoers.d/mail_sudoers

File should look exactly like below. Be sure to include double quotes.

Defaults    mail_always
Defaults    mailto="youremail@gmail.com"

Visudo will set the proper permissions for you. No need for chmod if you are using Ubuntu 16.10 or later.

man sudo, visudo, sudoers will help greatly.
I’ve included a screenshot of what the email looks like. Naturally the important bits after the @ have been removed.

sudo

The Details of What I Offer & The Cost

I install the Ubuntu Linux operating system to replace Microsoft Windows. I also provide support in case you run into trouble.

If I can’t get it done because I don’t know how and I don’t know how to acquire the knowledge or your hardware does not work with Ubuntu I will not charge you.

My fees are as below.

$30.00 One time install fee. Most likely this is all you will need to pay.

$0.00 For the entirely optional one hour tutorial where I teach you everything you need to know to be in control of your computer.

I do not install server applications and I do not support server applications.  There is one exception and that is SSH.  To install SSH I require a static IP address.  Dynamic DNS services are not supported for SSH.  I will setup and install SSH server with sane defaults and no root login and if you have a smart phone I can set up two factor authentication for SSH set up which I will do for you.

My Web Site Is Coming, Hang On

I’m in the business of helping home computer users get started with Ubuntu.  The technical details are, I install Ubuntu in OEM mode and then my customers can turn on the computer and go from there. Or the customer can hire me for an hour to walk them through the new user set up and teach the person how to use the computer.

Hopefully my support services would rarely be needed if the, it just works myth comes true, lol.